
APPLY WITH PRECISION.
FITS MOST MAKES AND MODELS
YEAR AFTER YEAR,
FEILD PROVEN RESULTS.
PinPoint II features individual nozzle control, turn compensation, and individual nozzle boundary control for maximum efficiency and accuracy, while minimizing product waste from overlap and inconsistent application.
PinPoint II controls flow and pressure independently to provide an accurate and repeatable application and increased production. Speed up, slow down, turn, overlap, or any combination of those variables will not affect the consistency built into this system.

PinPoint II Features

INDIVIDUAL NOZZLE CONTROL
Control every nozzle as its own section.

TURN COMPENSATION
Compensates for boom speed differences, to output an even flow across the entire boom.

INDIVIDUAL NOZZLE DIAGNOSTICS
Nozzle-by-nozzle diagnostics and system feedback.

PRESSURE INDEPENDENT OF RATE AND SPEED.
Flow rate and pressure are controlled independently, allowing for consistent droplet size over large speed ranges.
Eliminated almost all overlap and over use..
“ Our sprayers with PinPoint have increased our productivity per day, and have eliminated almost all of our overlap and over use of chemicals.”
- Eric Ebelhar, Pasture Belt Farms LLC
Best precision ag ROI we've ever seen..
"Would rather run an old wore out sprayer outfitted with CapstanAG PinPoint than a brand new one without it. Individual nozzle shutoffs are the best precision ag ROI we've ever seen."
- Neil, Iowa Grower
PinPoint II Resources
PinPoint II
English - Download PDF File
Portuguese - Download PDF File
PinPoint II for N-Ject NH3
English - Download PDF File
PinPoint™ II Field Install Guide - AGCO RoGator C Series
PSI NAV Commander Module Kit for Case IH (2017+) and Apache (2018+)
PinPoint™ II Settings for Apache Sprayers 2020+
PSI NAV Commander Module Kit for AGCO RoGator C Series
Synchro Cable with PWM Ground Resistor
Synchro Cable with PWM Control or Bypass Servo - Apache Sprayers
Synchro Cable - Miller/New Holland
Synchro Cable with PWM Ground Resistor Kit - Apache Sprayers 2017/2018
Synchro Cable with PWM Control or Bypass Servo -Miller/New Holland
Synchro Cable - AGCO 900/1100/1300
Key Switched Power Cable - Case IH 2000 Series
Key Switched Power Harness - AGCO 700/900/1100/1300, John Deere R-Series, Apache (2014+), Miller/New Holland
Interface Harness - Case IH (2017+)
Hub Mount Kit - Hagie (2018+) with a 120 ft or 132 ft Boom
Hub Mount Kit - John Deere R4023/R4630
Hub Mount Kit - John Deere R4030/R4038/R4045
Hub Mount Kit (Small Frame Mast) - AGCO 900/1100/1300 (2015+)
Hub Mount Kit (Large Frame Mast) - AGCO 900/1100/1300
Hub Mount Kit - AGCO RoGator C Series
Exporting GPS - John Deere, GS2/GS3 Starfire 3000 or 6000
Display Settings - John Deere, R4030/R4038/R4045
- Software Update Procedure
- Software Update Matrix
- PinPoint II Software Release Note — Power Hub Software 2.92—June 2022
- PinPoint II Software Release Notes—VCM Software 2.44—May 2021
- PinPoint II Software Release Notes—Power Hub Software 2.87—April 2021
- PinPoint II Software Release Notes—CapView Software 4.48/Power Hub Software 2.84/VCM Software 2.43—Oct. 2020
- PinPoint II Software Release Notes—CapView Software 4.27/Power Hub Software 2.75/VCM Software 2.41—Feb. 2020
- PinPoint II Software Release Notes—CapView Software 4.25 and Power Hub Software 2.72—Sept. 2019
- PinPoint II Software Release Notes—Power Hub Software 2.61—June 2019
- PinPoint II Software Release Notes—CapView Software 4.18—Oct. 2018
- PinPoint II CapView II Software Technical Bulletin—Oct. 2018
- PinPoint II CapView II Software Application Code Update—Oct. 2018 (CapView, Power Hub, & VCM Code)
- PinPoint II CapView II Software Application Code Update—Dec. 2018 (Power Hub Code Only)